hwacompu.blogg.se - Cara hack wifi dengan wifi repeater

Within 2 minutes, press the WPS button on the Repeater for 1 second.

If it doesn’t, relocate the Repeater closer to the router to achieve better signal quality. Wait for about 2 minutes until the Signal LED turns solid Green.The location you choose must be within the range of your router. Plugin the Repeater about halfway between your router and the Wi-Fi dead zone.Connect your devices to the Repeater wirelessly or via an Ethernet cable, then enjoy the internet.

Note: If the LED does not turn solid on, refer to FAQ-2.Į. The Repeater LED should turn solid on, indicating a successful connection to your router. Note: The Password is the same as your master router.ĭ. The default Repeater SSID is set to be XXXX-EXT(XXXX indicates The master router s wireless network name). The system will automatically scan the surrounding wireless networks.Ĭ.Select the SSID of the master router and enter Repeater SSID and the Password.

Follow web instructions to complete the setup.ī.

Note: If the login window does not appear, refer to FAQ-1.

Launch a web browser, and enter or set up.

The default wireless name can be viewed on the bottom label of the repeater. If you are using a computer, unplug the Ethernet cable if any. Connect your computer or smartphone to the Repeater’s network: PIX-LINK-2.4G, Default Password is 12345678.Plug the Repeater into a power outlet next to your router. Repeater Mode: Connect your devices to the Repeater wirelessly or via an Ethernet cable, then enjoy the internet. (Repeater Mode) Press and hold the button for less than 3s to start WPS uplink. (AP Mode) Press and hold the button for less than 3s to start allowing clients to connect. Reset/WPS Press and hold the button more than 5s until the Repeater led quick blinking, System set factory default. Slow Blinking WPS failure or relay failure Quick Blinking System set factory default Ports and Buttons Item Description LAN/WAN Connect PC or Router. (Repeater Mode) On WPS successful or Relay successful. Quick Blinking System set factory default. (AP Mode) off The system is operating normally. Off The port abnormal or cable unplugged Flashing WPS UP. Blinking The port is transmitting or receiving data. Off WIFI Down or WIFI abnormal On Cable accessed. Blinking WIFI is transmitting or receiving data. LED Explanation LED Status Indication On Normal power supply Off Abnormal power supply or no power supply.